solarseller.com alternative energy by John Drake Services, Inc. | home
5 Photovoltaics,Batteries, Cable and Wire 7 48 volt D.C. fluorescent lights 8 Low Voltage DC Lights Glossary of Alternative Energy Terms CHARGE CONTROLLERS 36 Solar Converters Special Solar and Battery Charging Equipment 37 TriMetric Battery System Monitors and Deltec Co. shunts 38 Timers,Linear Current Boosters,Photoswitch,Voltage Controlled Switches 39 Battery Desulphator by Solar Converters, Inc. 42 QuickCable links to instock products 48 DC Fuses, Holders & Fuse Blocks 56 Special Order Lenses for Thin-Lite Fluorescent Lights 57 Thin-Lite Special Order replacement ballasts 58 Special Order Lenses for Thin-Lite LED Lights BATTERY POST & TERMINAL CONNECTIONS, ADAPTERS AND BATTERY ACCESSORIES 62 Heat Shrink Tubing & Cable Lugs by QuickCable 67 Anderson SB Connectors 72 Iota Engineering Battery Chargers / Converters 73 SAE Connectors, Plugs, Sockets & Cords 75 DC to DC Voltage Converters & Dimmers by Solar Converters 76 Universal Generator Starter switch by Solar Converters 79 Thin-Lite Ballast Wiring Layouts 81 TriMetric 2030 and SC-2030 Wiring Layout
At the bottom of this page is a list of page links to every page in our website.
Updated on
10/6/20
To find an item in our website please click on the following link:
We DO ship to P.O. Boxes.
We ship to the lower 48 States, Alaska, Hawaii, Puerto Rico and the U.S. Virgin Islands only.
Please see the following for:
For questions or to order by phone please call:
(562) 423-4879
You can easily order by phone.
NC25A controller overview:
NC25A controllers by voltage:
NCHC controllers overview:
NCHC controllers by voltage:
For Diversion Heating loads please click onto the following link:
Flexcharge Night Stick portable 12 volt
We can special order any of the flexcharge line.
Please click onto the following link to go to their website:
30 Wind - Hydro - Solar Charge Controllers by Flexcharge
SES Flexcharge, Seelye Equipment Specialties, NC25A and
NCHC controllers.
All of the Flexcharge charge controllers on this page are suitable for
solar / wind / hydro generation as well as for use with Generators, Battery Chargers
and D.C. Power Supplies / sources. Being hybrid charge controllers they can accept
different types of charging power sources at the same time.
They are also very quiet audibly, and more importantly in regards to Radio Frequency
Interference and are used systems that are sensitive to electronic interference such as
seismic monitoring sites and remote communications applications .
Many people are setting up hybrid alternative energy sources such as solar / wind and
solar / hydro to get the most out of their site location.
Whether you have a hybrid or single source of alternative energy these charge contollers
allow you to optimize power production.
When using the following charge controllers, a blocking diode is needed for each
photovoltaic module to prevent night time power draw through the modules.
A blocking diode also protects photovoltaic modules from voltage spikes produced by
permanent magnet generators such as used in wind and hydro generators.
The are easy to install in the "J" box (junction box) on each panel and we keep them in stock.
All multi-panel solar systems should include diodes to protect the panels from each other in
times of shading, panel breakdown, ground fault problems and for night time isolation from
battery.
These charge controllers can utilize diversion charge control when available.
Once the batteries are fully charged, this allows you to send excess power to another load
such as a water or air heating element.
By doing this, you are able to use more of the power produced by your alternative energy
source.
When using solar panels, a diversion load is not needed.
A personal comment on this line of charge controllers:
For the selection of diversion loads we stock, please click onto this page
link:
To use the NC25A as a high capacity ( high amperage ) dump load controller
please click onto the following link:
NC25A controller operating parameters:
Input Charge Voltage of all four controllers: 0 volt d.c. to 140 volt d.c.
The controller does not change the incoming voltage - the battery bank
and power source control the voltage delivered to the batteries.
Battery Voltage range coming from the battery(s) through the Sense wires:
12 volt controller of 0 to 16 volt d.c.
24 volt controller of 0 to 32 volt d.c.
36 volt controller of 0 to 48 volt d.c.
48 volt controller of 0 to 64 volt d.c.
Standby Current Draw of 2ma (.002 amps)
Operating Current Draw of 7ma (.007 amps)
Short Term (surge) overcurrent for up to 1/2 second of 50 amps
Total Charging Efficiency from 98.9% to 99.8%
Insertion Loss Resistance in Ohms of 0.001 ohms to 0.004 ohms
Diversion Load Current from 0 amps to 25 amps
Charge Diversion Over Current up to 1/2 secon of 50 amps
Transient Surge Protection (20 microseconds) of 1500VA
Operating Temperature Range of -40 degrees C to +60 degrees C
Housing Dimensions of 4" wide by 3.75" high by 1.5" front to back
Flexcharge charge controllers have a peak charge efficiency of 99.9%
resulting in a very high yield of power going to your batteries and loads.
These can be used with flooded or sealed (AGM or gel cell) batteries as
well as for use with flooded cell Ni-Cad batteries.
The LED on the front indicates charging, low battery and when the
controller is in the diversion mode.
The charging method these controllers provides for daily micro equalization
of the cells as the battery(s) is reaching full charge and is safe for sealed batteries.
Please look at the pictures closely, these charge controllers can
handle high amperages but you will not see heat sink cooling fins -
they do not require them.
The incoming power is not wasted as heat.
The units are factory sealed which makes them great for any environment.
All come with the manufacturer's five year warranty and are made in the U.S.
We stock the NC 25A in the 12, 24, 36 and 48 volt versions.
All of the Flexcharge controllers are expandable to handle hundreds of
amps when optional external contactors are added.
We stock external contactors - please call us at (562) 423-4879 for
availability and pricing.
To see the owner's manual for the NC 25 A, please click onto the
following link: NC 25A manual
For more information on expansion kits please click on the following link:
Everything priced on this page is in stock
We ship UPS Ground Monday through Friday and
Priority Mail Monday through Saturday.
Images on this page are copyright by Flexcharge.
NC25A controllers:
For a larger picture, please click onto the image.For the factory page on the NC 25A controllers, please click onto the following link:
The following links will take you to each NC 25A charge controller
on this page:
1) Flexcharge mod. NC 25A / 12 charge controller for a 12 volt battery system..
12 volts, 25 amps for solar, wind, hydro or a combination.
Adjustable output from 13.8 to 16.0 volts. Has low battery indicator.
Factory pre-set to output 14.25 volts.
Currently we have 5 in stock.
If you order more than we have, we will get more (about 7 to 10 days) and
ship your order complete when they come in - NO partial shipments on these items.
PRICE: ( NC 25A - 12 ) $ 97.75 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
2) Flexcharge mod. NC 25A / 24 charge controller for a 24 volt battery system.
24 volts, 25 amps for solar, wind, hydro or a combination.
Adjustable output from 27.6 to 32.0 volts.
Factory pre-set to output 28.50 volts.
As we do not stock as many of this 24 volt model as we do the 12 volt
model - we will show our daily inventory.
Currently we have 1 in stock.
If you order more than we have, we will get more (about 7 to 10 days) and
ship your order complete when they come in - NO partial shipments on these items.
PRICE: ( NC 25A - 24 ) $ 109.50 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
3) Flexcharge mod. NC 25A / 36 charge controller for a 36 volt battery system.
36 volts, 25 amps for solar, wind, hydro or a combination.
Adjustable output from 42.3 to 46.5 volts.
Factory pre-set at 42.75 volts.
These are quite popular for use with golf carts and some
of the older wind generators.
As we do not stock as many of this 36 volt model as we do the 12 volt
model - we will show our daily inventory.
Currently we have 1 in stock.
If you order more than we have, we will get more (about 7 to 10 days) and
ship your order complete when they come in - NO partial shipments on these items.
PRICE: ( NC 25A - 36 ) $ 125.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
4) Flexcharge mod. NC 25A / 48 charge controller for a 48 volt battery system.
48 volts, 25 amps for solar, wind, hydro or a combination.
Adjustable output from 55.2 to 64.0 volts.
Factory pre-set at 57.00 volts.
We no longer stock the 48 volt version but are keeping this information
for reference purposes.
_________________________________
We offer the following blocking diode.
Blocking / by-pass diode
6 amp - 1000 volt rated, these also protect your modules from
local high voltage spikes.
PRICE: ( BLOCK - 6 ) $ 1.50 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
We also stock the Flexcharge timer and the
Flexcharge Night Watchman photoswitch.
Please click onto this page link:
________________________________________________
NCHC Controllers:
A note on how we sell the NCHC controllers.
We stock the individual components.
When an order is placed we assemble the controller setup
according to your order.
To see our current inventory of components, please click onto
the following link:
Flexcharge NCHC series of high performance
industrial grade charge controllers.
These highly efficient controllers are available in 12, 24, 36 and 48 volts,
and in 35, 60 and 100 amp charging / diversion currents.
They can be easily expanded in the field to handle up to 1000 amps of
charging current.
When setting up an NCHC for over 100 amps -
Please call us first.
The NCHC uses external mercury contactors for rapid switching to control
charging current.
Ideal for charging lead acid flooded or sealed (AGM or gel cell) batteries as
well as for flooded cell Ni-Cad batteries.
Being one of the most versatile controllers, the NCHC allows you to charge
your battery(s) from photovoltaic modules and / or a wind or hydro generator
as well as most d.c. power sources such as outboard motors, battery
chargers and power supplies.
The controller continually monitors the battery(s) state of charge and allows
full power from your energy source to go into the battery(s).
This offers an excellent charging algorithm and extends battery life.
The NCHC can be ordered in a configuration to match your charging source
type and output.
When used with photovoltaic modules alone, only the charging contactor is
required to disconnect the modules when the battery is fully charged - it will
also cycle open and closed to keep the batteries topped off.
This charging method reduces sulfation and puts less stress on your batteries.
Blocking diodes, which we stock, are required to prevent night time discharge
through your modules.
The picture above shows the NCHC with the divert contactor to the left of the
charging contactor.
The divert contactor is used when the charging source can not be disconnected
from the batteries (or a load) while it is producing power - such as a wind
generator or mini / micro hydro-electric generator.
It can also be used with photovoltaics when you want excess unused power
to go to a heating load.
When the NCHC senses a full charge at the battery(s) it will open the charging
contactor (which disconnects incoming power from the batteries) and closes
the divert contactor which allows incoming power to go to a diversion load
such as a water or air heating element.
The NCHC will cycle back and forth as needed to maintain a high state of
charge in your battery system.
When photovoltaic modules are combined with a wind or water power source,
blocking diodes are required at the modules to both prevent night time
discharge as well as to protect the modules from high voltage spikes which
can be produced by a mechanical charging source.
Some customers who are combining solar and wind use two charging
contactors and one divert contactor.
The wind generator utilizes one charging and one divert contactor.
The solar input utilizes only one charging contactor.
This allows the user to size one charging and one divert contactor for the
wind/hydro generator.
The solar input uses one charging contactor only which is sized to match
its input power.
As the incoming solar input does not need a diversion load, the user
only needs to size the divert load to match the wind/hydro power.
This can represent a large cost savings.
It is also recommended that you place a diode at the wind or water power
source for system protection.
By paralleling additional contactors one NCHC Control Module can handle
thousands of amps of power.
The NCHC can also be used with a power source of up to 120 volts d.c.
This is done by connecting a 48 volt NCHC control module to a portion
of the battery bank (48 volts worth).
By monitoring that section of the battery bank its contactors can control
incoming power.
For full specifications and options available please click
onto this link: NCHC Manual and Options
To see the owner's manual for the NCHC please click onto the
following link: NCHC Manual
If you have any questions don't hesitate to call us
at (562) 423-4879.
We have grouped the controller variations by voltage.
If you need a configuration not shown below, please
call us.
We stock extra contactors.
Please click onto the following link for pricing.
For high voltage silicon blocking diodes please click onto this
link: Blocking - Bypass Diode
The following links will take you to each NC 25A charge controller
on this page:
12 volt:
12 volt NCHC with 35 amp charging contactor.
( NCHC - 12 - 35 - C ) $ 220.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
12 volt NCHC with 35 amp charging and 35 amp divert contactors.
( NCHC - 12 - 35 - C/D ) $ 273.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
12 volt NCHC with 60 amp charging contactor.
( NCHC - 12 - 60 - C ) $ 293.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
12 volt NCHC with 100 amp charging contactor.
( NCHC - 12 - 100 - C ) $ 350.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
12 volt NCHC with 100 amp charging and 100 amp divert contactors.
( NCHC-12 - 100 - C/D ) $ 443.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
__________________________________________
24 volt:
24 volt NCHC with 35 amp charging contactor.
( NCHC - 24 - 35 - C ) $ 220.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
24 volt NCHC with 35 amp charging and 35 amp divert contactors.
( NCHC - 24 - 35 - C/D ) $ 273.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
24 volt NCHC with 100 amp charging contactor.
( NCHC-24 - 100 - C ) $ 350.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
24 volt NCHC with 100 amp charging and 100 amp divert contactors.
( NCHC-24-100- C/D ) $ 443.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
__________________________________________
48 volt:
48 volt NCHC with 35 amp charging contactor.
( NCHC - 48 - 35 - C ) $ 230.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
48 volt NCHC with 35 amp charging and 35 amp divert contactors.
( NCHC-48-35-C/D ) $ 293.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
48 volt NCHC with 60 amp charging contactor.
( NCHC-48-60-C ) $ 254.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
48 volt NCHC with 60 amp charging and 60 amp divert contactors.
( NCHC-48-60-C/D ) $ 357.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
48 volt NCHC with 100 amp charging contactor.
( NCHC-48-100-C ) $ 350.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
_________________________________
48 volt NCHC with 100 amp charging and 100 amp divert contactors.
( NCHC-48-100-C/D ) $ 517.00 each
The following PayPal shopping cart accepts all major
credit cards, e-checks and PayPal accounts - you do not
need to be a PayPal member to use this cart. Shipping
is Priority Mail.
The NCHC is also available in 36 volt as a special
order item. Just call us at (562) 423-4879 for availability
and pricing.
_______________________________________________
Individual contactor pricing.
These can be ordered by phone, please call us at (562) 423-4879 for availability.
You can also send us an e-mail to: john@solarseller.com
Let me know what you want and your ship to zip code.
I will send you a PayPal invoice by e-mail which you can pay securely
online.
Contactor Voltage & Amperage
|
Type
|
Price
Plus Shipping
|
12 volt - 35 amp
|
normally Closed for Charging
|
$ 70.35
|
12 volt - 35 amp
|
normally Open for Diversion
|
$ 66.00
|
12 volt - 60 amp
|
normally Closed for Charging
|
$ 98.70
|
12 volt - 60 amp
|
normally Open for Diversion
|
$ 97.65
|
12 volt - 100 amp
|
normally Closed for Charging
|
$ 181.65
|
12 volt - 100 amp
|
normally Open for Diversion
|
$ 181.65
|
|
|
|
24 volt - 35 amp
|
normally Closed for Charging
|
$ 70.35
|
24 volt - 35 amp
|
normally Open for Diversion
|
$ 66.00
|
24 volt - 60 amp
|
normally Closed for Charging
|
$ 98.70 special order only
|
24 volt - 60 amp
|
normally Open for Diversion
|
$ 97.65 special order only
|
|
|
|
48 volt - 35 amp
|
normally Closed for Charging
|
$ 70.35
|
48 volt - 35 amp
|
normally Open for Diversion
|
$ 66.00
|
48 volt - 60 amp
|
normally Closed for Charging
|
$ 98.70
|
48 volt - 60 amp
|
normally Open for Diversion
|
$ 97.65
|
48 volt - 100 amp
|
normally Closed for Charging
|
$ 181.65
|
48 volt - 100 amp
|
normally Open for Diversion
|
$ 181.65
|
As many of you know, we used a number of different types of
charge controllers in the systems at our old location.
One of the systems used a Flexcharge model NC30-12L
controller.
This controller uses the same charging method as the
NC25A and NCHC controllers.
The battery bank needs less watering than our other
systems which have Pulse Width Modulation or Maximum
Power Point Tracking type charge controllers.
We remotely monitored the system with a TriMetric 2020
and you can see on the TriMetric display how the controller gently
charges the battery bank.
The PayPal Shopping Cart shipping rates are shown
in the following table.
With the exceptions of items which show a flat shipping
rate, the PayPal shipping costs are based on the
amount of your order and only offer ground shipping.
$ 0.01 - 9.99
|
$ 7.55
|
$ 10.00 - 34.99
|
$ 8.25
|
$ 35.00 - 99.00
|
$ 14.50
|
$ 100.00 - 199.99
|
$ 16.00
|
$ 200.00 and over
|
$ 17.00
|
How to order:
1) You can securely order on-line using the 
button to
button to pay using Mastercard, Visa, Discover, American Express,
an e-check (electronic check from your checking account) or
if you already have a PayPal account - from the funds in your account.
2) We accept telephone orders and accept Mastercard, Visa and American Express.
3) Checks and money orders are gladly accepted by mail.
You can print out the order form on our website or just list the description
and catalogue numbers of the items you need.
1 Site Search - Quick Index | 2 The Realities of Purchasing On-Line | 3 Why Do Business With Us? | 4 Distributor of IOTA Engineering, Quick Cable and Thin-Lite products | 5 Photovoltaics,Batteries, Cable and Wire | 6 Lumen Outputs of Compact Fluorescent and Incandescent Lights | 7 48 volt D.C. fluorescent lights | 8 Low Voltage DC Lights | 9 Why buy Thin-Lite lights? | 10 Thin-Lite Emergency Survival Disaster LED lights | 11 Bogart Engineering Battery Management System packages | 12 Educational Pages On This Site. | 13 Balanced Battery Charging and Dis-Charging by IOTA | 14 Portable & Emergency Fluorescent Light by Flexcharge | 15 DC Fluorescent Inverter Ballasts by IOTA Engineering and Montana Light | 16 Charge Controller Musings | 17 Bogart Engineering SC-2030 Solar Charge Controller | 18 PV Solar charge controllers with night lighting load by Flexcharge | 19 Thinlite Indoor Fluorescent Lights | 19 A - LED Lighting by Thin-Lite | 20 Thinlite Outdoor Lights | 21 Thinlite Replacement Ballasts | 22 Thinlite Replacement Lens - Diffusers | 23 Thinlite DC Lighting Products | 24 DC Lighting | Glossary of Alternative Energy Terms | 25 Parallel and Series Battery Bank Information | 26 What we sell and why. | 27 Amps Volts and Watts | CHARGE CONTROLLERS | 28 Emergency and Disaster Preparedness Notes | 29 Photovoltaic Module & System Wiring - Setting Up A PV System | 30 Wind - Hydro - Solar Charge Controllers by Flexcharge | 31 Water and Air Heating Diversion Loads for Charge Controllers | 32 Maximum Power Point Tracking Solar Charge Controllers by Solar Converters | 33 Solar Converters, Inc. Charge & Lighting Controllers | 34 SES Flexcharge Solar Single or Dual Battery Charge Controllers | 35 Thin-Lite ballast replacement installation guide | 36 Solar Converters Special Solar and Battery Charging Equipment | 37 TriMetric Battery System Monitors and Deltec Co. shunts | 38 Timers,Linear Current Boosters,Photoswitch,Voltage Controlled Switches | 39 Battery Desulphator by Solar Converters, Inc. | 40 Bogart Engineering Product Index - Links | 41 SES Flexcharge Products | 42 QuickCable links to instock products | 43 Thin-Lite products we stock | 44 DC Fuse & Circuit Breaker Types & Installation | 45 Switches - DC rated wall switches | 46 IOTA Engineering IQ4 Smart Charge Controller Owners Manual | 47 Our own alternative energy systems | 48 DC Fuses, Holders & Fuse Blocks | 49 Class T- DC Fuses & Fuse Blocks | 50 ANN - ANL - CNL DC Fuses & Fuse Blocks | 51 Inverter Cable and Overcurrent Protection Guide | 52 Installation and trouble shooting low voltage d.c. lighting | 53 Diodes - Blocking & Bypass, What do they do? | 54 Low Voltage D.C. Lighting Tips | 55 Your On-Line Privacy | 56 Special Order Lenses for Thin-Lite Fluorescent Lights | 57 Thin-Lite Special Order replacement ballasts | 58 Special Order Lenses for Thin-Lite LED Lights | BATTERY POST & TERMINAL CONNECTIONS, ADAPTERS AND BATTERY ACCESSORIES | 59 Battery Post Marine Conversions & Terminal Extensions | 60 Battery Post Connectors Conversions Adapters Repair | 61 Battery Terminal & Post - Cable Lug Covers & Protectors | 62 Heat Shrink Tubing & Cable Lugs by QuickCable | 63 Cable Lugs - Compression Connectors - No Crimping & No Soldering | 64 Heavy Duty Cast Copper Connectors - Lugs | 65 Cable Lugs - Copper Connectors - by Quick Cable - MAX | 66 Cable Lugs - Magna Lug Heavy Duty & Fusion by QuickCable | 67 Anderson SB Connectors | 68 Anderson SB Connector Accessories | 69 Solar Converters Special Order Items | 70 Thin-Lite LED and Fluorescent Comparisons | 71 Overview of Our Photovoltaic Systems | 72 Iota Engineering Battery Chargers / Converters | 73 SAE Connectors, Plugs, Sockets & Cords | 74 IOTA Engineering inverter ballasts | 75 DC to DC Voltage Converters & Dimmers by Solar Converters | 76 Universal Generator Starter switch by Solar Converters | 77 Stranded vs Solid Wire in low voltage systems | 78 IOTA Engineering Power and Lighting products | 79 Thin-Lite Ballast Wiring Layouts | 80 Wire & Cable Gauges and Information | 81 TriMetric 2030 and SC-2030 Wiring Layout | 82 Bogart Engineering WiFi unit | 83 TriMetric 2030 Battery Monitor Features | 84 IOTA Engineering DLS Battery Charger Features | 85 Lighting Systems | 86 Practical Alternative Energy Applications | 87 Portable and Emergency Power Systems | 88 Custom Cables | 89 Thin-Lite Special Order Fluorescent Models & Pricing | 90 Resources for Disaster & Emergency Preparedness | 91 Thin-Lite Special Order LED Light Models & Pricing | 93 My solar / photovoltaic history | 94 Battery Wiring Diagrams | 95 Battery Condition and State of Charge Charts | 96 Order Form | 97 Backup Power? | 98 Energy Expectations | 99 Power Needs Worksheet | 100 Efficiency | 101 Wire Loss Chart | 102 Solar Insolation Map / Chart | 103 SAE Connector Selection | 104 About Us | 105 Statement of Policy & Warranty/Returns | Contact Us | MPPT Charge Controllers - FAQ | Battery Equalizer/DC Autotransformers - FAQ | Constant Voltage Pump Drivers - FAQ | Linear Current Boosters - FAQ | Information | 1 | 2 | 3 | 4 | 5 | 6 | 7 | How To Videos and Reference by Quick Cable | Home Power Articles | R | P | A | B | C | D